Getting a TV antenna is a big step, which can cost several hundred dollars or more. The better-built TV antennas can cost tens of thousands of dollars, but even with the highest quality antennas, you’re still not likely to break the bank. DIY TV antennas are easy to find and aren’t very expensive to buy. It is worth it to purchase an antenna that will last years and provide crystal-clear reception.
Why choose a DIY installation of a TV antenna? The biggest reason to go this route is cost. DIY installation of a tv antenna will help bring you a large TV set into your house, delivering better radio and television reception. They are easy to install; only one individual with a few tools and a few hours with some spare time should accomplish the job.
Choosing the best mounting location for your DIY tv antenna installation isn’t all that hard either. If you want the best reception possible, make sure you install the dish at the most optimal height. A lot of dishes these days come with manuals that outline the ideal mounting height. If you aren’t comfortable determining this on your own, you might want to enlist the help of a professional installer.
There are two options available when installing a dish for your new television. You can either go with an aerial installation where the television and all its components are mounted above the antennas or go with a ground installation. Both have their pros and cons. With an aerial installation, you’ll get the best reception, but the installation is much more complicated since you need a bigger hole for the TV cable to run through.
Most aerial TV satellite providers offer pre-made mounts for their customers, or you can choose to purchase a universal mount for a single antenna mast. If you already have a TV mast installed, you can choose to buy an extension pole to extend your TV antenna mast length. This option is the easiest way to go. However, it’s expensive and not ideal if you don’t have a permanent TV mast. The other option, which is a bit more expensive, is to purchase a universal TV mount that allows you to connect various devices to your TV.
Now, for a quick discussion on attic TV Antenna Installations. If you have an attic, this is the perfect place for your DIY TV installation. Most people install their outdoor antenna systems in the backyard. However, if you don’t have an attic and are only working from a concrete floor, your setup will be a little bit trickier. Here’s what you’ll need to get started: A cutting mat or an eight-foot piece of plywood, a ladder, a friend or family member to stand on the ladder with you to help hold the ladder steady while you attach the mat to the top rung of your stairwell, some screws and bolts, and an outdoor antenna cable to connect your mount to your TV. Depending on how elaborate you want your system to be, all these items will be mentioned below.
When it comes to Antenna Installations, things are pretty simple. Since the rung is on the second level of the attic, you can expect good reception even without a direct line of sight to the top of your roof. However, if you live in a city or town with high winds (which can get very strong in the winter months), strong winds may blow your satellite dishes into other areas of your yard, which can also affect your reception. High winds are nasty in the wee hours of the morning when most people are sleeping. If you live in such an area, it’s a good idea to install your system during the offseason; at least if you want a strong reception the next day.
Know that tv antenna installation can be performed indoors, but you have to bear in mind that indoor installations are usually less sturdy than outdoor ones. Installing indoor ones is painless and usually takes no more than half an hour, whereas outdoor antennas can take up to two hours before installing. It is essential to follow the directions carefully when installing indoor systems to don’t short the wire that runs between the input and receiver units. Otherwise, you may find that you cannot connect the receiver to the television at all!